How is the EU Flight Emissions Label calculated?
The European Union Aviation Safety Agency (EASA) calculates every EU Flight Emissions Label with the same method, set out in Annex II of Implementing Regulation (EU) 2024/3170. It starts from the airline’s own operating data, so two airlines on the same route can get different labels.
-
Estimate the fuelFor each flight or set of flights, EASA takes the average block fuel the airline reported for flights on that route in previous corresponding scheduling periods. If there is no usable data, it models the fuel burn with the Breguet range equation instead.
-
Apply the fuel’s life cycle emissionsThe fuel is converted to energy and multiplied by the average life cycle emissions of the fuel uplifted at the departure airport, which covers both producing the fuel and burning it. Conventional jet fuel counts as 89 g CO₂e per MJ, so sustainable aviation fuel uplifted at that airport lowers the average. SAF batches can be assigned to particular flights only if they were physically delivered for them, with proof of supply.
-
Split between passengers and freightThe flight’s emissions are shared between the cabin and the freight by mass, counting each passenger with luggage as 100 kg.
-
Work out the figures per passengerThe cabin’s share is divided by the average number of passengers on the same flights in the previous corresponding scheduling period. For the efficiency figure, it is also divided by the great-circle distance of the route.
-
Allocate to cabin classesOn aircraft with more than one cabin class, the cabin’s emissions are allocated by the floor area per seat in each class, compared with the lowest class. Default factors apply when there is not enough data.
-
Compare with a benchmarkThe result is compared with a benchmark based on typical performance on the route or comparable routes.
The yearly cycle
- By 1 February, an airline applies for labels and says which flights they should cover.
- By 1 May, it reports its scheduled flights for the next two scheduling periods and data on its operations in the previous calendar year.
- By 30 June, EASA estimates the emissions, issues labels for the winter and summer scheduling periods and sends them to the airline in a machine-readable format.
- At least every six months, EASA checks whether the factors behind a label have changed.
EASA also runs a public flight emissions website, where anyone can search the labels by departure and arrival airport without registering.
How it differs from other flight methodologies
- Airline-specific data: many published emission factors are averages, for example by distance band and cabin class. The label uses each airline’s own fuel and passenger data for the route.
- Fuel life cycle included: the label counts producing the fuel as well as burning it. Some methodologies count only the burning.
- No non-CO₂ effects: the method multiplies fuel by the fuel’s life cycle emissions and has no factor for non-CO₂ effects such as contrails. Some methodologies add these with a radiative forcing multiplier: see What is the Radiative Forcing Index (RFI)?
So a label can differ from the figure another methodology gives for the same flight. Whatever you use, say which method and energy scope your figures are based on. Each page in our methodology library describes the sources and assumptions behind a calculation methodology.