Methodology library

Flight methodology

CO₂-emissiefactoren

Dutch emission factor list

Factors from the Dutch reference list of emission factors, used by organisations reporting in the Netherlands. The factor depends on the distance band and, in the newer factor set, the cabin class.

Publisher
CO2emissiefactoren.nl
Best for
Reporting in the Netherlands
Result
One total per trip, for all travellers, in CO₂e
Energy scope
WTW by default, TTW optional
Non-CO₂ effects
Included by default, can be switched off
Factor year
Picked from the travel date, or selectable
Greenhouse gases
CO₂e as published in the Dutch list

How it works

  • Distance comes from the airports, or from the actual distance where known. The Dutch factors are meant for the great-circle distance between airports and already allow for detours and holding.
  • Distance bands: regional (under 700 km), European (700 to 2,500 km) and intercontinental (over 2,500 km).
  • SQUAKE supports an older factor set without cabin classes and a newer set with them. It picks the set that matches the travel date, unless you choose one.
  • The Dutch factors include producing the fuel and a multiplier for non-CO₂ effects at altitude.

Unit and greenhouse gases

  • Results are in CO₂e (carbon dioxide equivalent) per trip, for all travellers on it, in grams, kilograms or tonnes as requested.
  • CO₂e covers the greenhouse gases from burning the fuel, plus producing and delivering it when the energy scope is WTW, as published in the Dutch list, converted into the amount of CO₂ with the same warming effect.
  • Non-CO₂ effects such as contrail cirrus and nitrogen oxides (NOₓ) are not among the greenhouse gases the GHG Protocol counts. By default, the Dutch multiplier adds them to the result. Switch them off to get greenhouse gases only.

Trip details used

When a detail is missing, SQUAKE uses the default.

DetailDefaultNotes
Origin and destination airportsRequiredTrips with connections are calculated leg by leg.
Actual distanceCalculated from the airportsUse the great-circle distance; the factors already allow for detours.
Cabin classAverageNo effect in the older factor set.
Number of travellers1
Travel dateNonePicks the matching factor set.
Sustainable aviation fuelNot usedOnly used if you send a SAF reduction, as a percentage of the trip's emissions. SQUAKE then lowers the result by that percentage, without calculating or checking it. This adjustment is outside the Dutch factors.

What is included

Included

  • Burning the fuel
  • Producing and delivering the fuel (on by default)
  • Non-CO₂ effects through the Dutch multiplier (on by default)

Not included

  • Aircraft manufacture and airport infrastructure

Limitations

  • Results are estimates from average emission factors. They are not a measurement of the actual emissions of an individual flight.
  • Factors are averages by distance band and cabin, not for a specific airline or aircraft.
  • Older factor sets have no cabin class detail.

GHG Protocol, CSRD and ESRS reporting

  • Scope 3: business flights belong in Scope 3, category 6 (business travel), of the GHG Protocol. ESRS E1 uses the GHG Protocol categories for Scope 3.
  • Boundary: the GHG Protocol's minimum boundary for business travel is the transport companies' own Scope 1 and 2 emissions: the fuel burned in the vehicles and the generation of the electricity they use. Producing and delivering fuel goes beyond that minimum, so say which energy scope your figure uses.
  • Unit: the GHG Protocol and ESRS report emissions in tonnes of CO₂e. Request results in tonnes, or divide kilograms by 1,000.
  • Global warming potentials: ESRS E1 asks for CO₂e based on the latest IPCC values over 100 years, currently those of the Sixth Assessment Report (AR6), and the GHG Protocol recommends the same. Published factors do not always use them, so check the Dutch list's documentation. Say which values your figures use.
  • Method: name the methodology, factor year and energy scope (WTW or TTW) next to the figure, and say whether non-CO₂ effects are included. Pin the factor year so the figure can be reproduced. Keep the same settings from year to year, or explain the change. The GHG Protocol asks you to describe the data sources, emission factors, global warming potentials, methods and assumptions behind each category.
  • Estimates: results come from published average factors, not from emissions data reported by the airline. The GHG Protocol asks for the share of emissions calculated with data from suppliers or other value chain partners, and ESRS asks companies to explain estimates, including their assumptions and how uncertain they are.
  • Credits and contributions: report the figure before any carbon credits or contributions. The GHG Protocol requires emissions to be reported independent of GHG trades such as carbon credits, and ESRS E1 also keeps credits out of the GHG figures. Report them separately.
  • Non-CO₂ effects: they are included by default. If your figure includes them, say so and state the multiplier, and consider showing the figure without them as well. The GHG Protocol treats them as optional and asks for the multiplier to be disclosed.
  • Sustainable aviation fuel: SQUAKE only uses SAF as an input if you send a SAF reduction for the trip, as a percentage of its emissions. Otherwise, it makes no SAF adjustment. If you send one, SQUAKE lowers the result by that percentage, as an adjustment outside the Dutch factors, and shows the percentage in expanded API results. It does not calculate or check the percentage, so only send one backed by SAF certificates issued to your company, and make sure the same SAF is not claimed twice. Report the result with and without the reduction, and say which one a claim refers to. The GHG Protocol and ESRS E1 report biogenic CO₂, for example from burning bio-based SAF, separately from the scopes.

Customer claims (EmpCo)

EU rules on environmental claims to consumers (Directive (EU) 2024/825, known as EmpCo) have applied since 27 September 2026.

  • Present results as estimates, name the methodology and say whether non-CO₂ effects are included, for example with a link to this page.
  • If you compare flights by their emissions, for example in a booking tool, tell customers how the comparison works: the methodology, what is compared and how often the data are updated. EU rules treat this as material information. Calculate every option with the same methodology and settings, including non-CO₂ effects, so the comparison is fair.
  • Do not claim that a flight is climate neutral, or has a reduced or positive climate impact, because of carbon credits. EU rules ban claims based on offsetting.
  • Describe contributions by what they fund, not as cancelling out the emissions of the flight.
  • Avoid generic claims such as calling a flight green or eco-friendly. Use specific statements, such as the figure and the methodology.

This section and the one above are general guidance, not legal advice.

Sources

  1. CO2emissiefactoren.nl: Dutch emission factor listco2emissiefactoren.nl

    The official list, updated every year (in Dutch).

  2. CO2emissiefactoren.nl: sources and assumptionsco2emissiefactoren.nl

    Includes the multiplier used for non-CO₂ effects of aviation (in Dutch).

  3. GHG Protocol: Scope 3 calculation guidanceghgprotocol.org

    Category 6 (business travel): what it covers and how to calculate it.

  4. GHG Protocol: Corporate Value Chain (Scope 3) Standardghgprotocol.org

    What to report for each Scope 3 category, including data sources, the share of supplier data and biogenic CO₂.

  5. GHG Protocol: Global Warming Potential valuesghgprotocol.org

    100-year global warming potentials from the IPCC, with the latest (AR6) values recommended.

  6. European Commission: corporate sustainability reportingfinance.ec.europa.eu

    The CSRD and the European Sustainability Reporting Standards (ESRS), including the 2026 revision.

  7. EUR-Lex: Directive (EU) 2024/825 (EmpCo)eur-lex.europa.eu

    EU rules against misleading environmental claims, applying since 27 September 2026.